失重性骨质疏松腰椎力学性能研究

航天员在长期失重环境影响下,会容易造成椎体失重性骨质疏松。为了探究骨质流失对腰椎承载能力的影响,设计了不同骨密度的腰椎力学仿真,通过图像处理建立了腰椎三维模型,利用有限元算法得到腰椎应力分布,对比了不同材料属性腰椎模型应力结果。结果表明:骨质疏松腰椎的应力值较正常腰椎变小,而形变量却明显增大。可以看出,骨质流失时,会导致腰椎骨骼材料性能发生变化,使腰椎形变量增大,并且使腰椎结构承载能力降低。     

基于射线追踪的快速雷达图像仿真方法

为了解决目标识别、隐身目标设计等研究领域对雷达图像需求日益增加的问题,提出了一种基于射线追踪的快速雷达图像仿真方法。该方法利用射线追踪计算每一个射线管的散射电场及其在雷达成像平面的投影坐标,通过将所有射线管的贡献在像域进行累加得到1幅二维雷达图像。通过对不同路径射线的聚类,可实现对散射贡献的分离,从而建立目标部件与强散射源的对应关系,并对复杂目标雷达图像进行解释。给出了Slicy目标的快速雷达图像仿真与算例分析,分析结果表明:基于射线追踪的快速雷达图像仿真方法可对复杂雷达图像进行有效预测,并能对强散射源进行成因分析。     

密封舱内漂浮小球运动规律的数值模拟研究

"天宫二号"空间实验室开展了首次人机协同在轨维修技术试验,机械臂操作终端抓取漂浮小球试验为在轨试验任务之一。为研究漂浮小球与机械臂操作终端运动特性之间的匹配性,文章建立了在轨微重力环境下小球运动的物理模型与数学模型,采用动网格方法对不同小球的运动特性进行数值模拟,得到小球的运动规律,由此确定小球的设计参数范围,作为机械臂操作终端系统方案设计的依据。最终,数值模拟结果与"天宫二号"空间实验室在轨试验数据的对比初步验证了该计算结果的正确性。     

Study of the rheological properties of water and Martian soil simulant mixtures for engineering applications on the red planet

The rheological properties of mixtures of water and the Martian soil simulant JSC-Mars-1A are investigated by preparing and testing samples at various solids concentrations. The results indicate that the dispersion is viscoelastic and, at small timescales (～0.1?s), reacts to sudden strain as an elastic solid. At longer timescales the dispersion behaves like a Bingham fluid and exhibits a yield stress. Hysteresis loops show that rapid step-changes (2?s duration) of shear-rate result in thixotropic behaviour, but slower changes (>10?s duration) can result in rheopexy. These observations are explained with the breakdown and recovery of the packing structure under stress. The rheological information is used to generate practical tools, such as the system curve and the Moody chart that can be used for designing piping systems, and calculating pump sizes and pressure requirements.     

SMOS与Aquarius卫星海表盐度测量方法及数据的对比分析

国际上发射的海表盐度遥感卫星主要有2颗:欧洲的SMOS和美国的Aquarius卫星,为给后续海表盐度遥感提供参考借鉴,对比分析了这2颗卫星的遥感器载荷、数据处理算法和盐度数据。遥感器载荷方面,SMOS采用L波段二维综合孔径辐射计,而Aquarius采用L波段实孔径辐射计加散射计;数据处理算法方面,分析了二者在介电常数模型、海面粗糙度校正以及反演算法方面的差异;盐度数据方面,分析了SMOS与Aquarius盐度数据之间的相关程度,并分别与ISAS(In Situ Analysis System)浮标盐度数据作对比,分析了2颗卫星的盐度数据精度。将2颗卫星的盐度遥感数据与ISAS浮标盐度数据对比发现,在全球范围内,Aquarius盐度测量精度优于SMOS;但在开阔海域,SMOS盐度测量精度优于Aquarius;而在近海岸区域,均出现较大的误差,且SMOS数据误差更大。     

Application of Wuhan Ionospheric Oblique Backscattering Sounding System (WIOBSS) for the investigation of midlatitude ionospheric irregularities

An upgrade of Wuhan Ionospheric Backscattering Sounding System (WIOBSS) was developed in 2015. Based on the Universal Serial Bus (USB), and a high performance FPGA, the newly designed WIOBSS has a completely digital structure, which makes it portable and flexible. Two identical WIOBSSs, which were situated at Mile (24.31°N, 103.39°E) and Puer (22.74°N, 101.05°E) respectively, were used to investigate the ionospheric irregularities. The comparisons of group distance, Doppler shift and width between Mile-Puer and Puer-Mile VHF ionospheric propagation paths indicate that the reciprocity of the irregularities is satisfied at midlatitude region. The WIOBSS is robust in the detection of ionospheric irregularities.     

单向电永磁作动器结构优化与动态特性分析

针对电磁作动器的使用要求，设计出一种具有能耗低、吸力大及响应快等特点的新型单向电永磁作动器。结合有限元仿真软件，利用有限元法研究作动器的结构参数如铁芯齿形结构、平面结构、无永磁结构、铁芯的倾斜角度及衔铁位移（气隙厚度）等因素对作动器电磁吸力和响应速度的影响。结果表明，电磁吸力随着作动衔铁位移的增加而大幅度减小；倾角结构的铁芯设计能使作动器性能达到最佳，且铁芯的倾斜角度为50°时，电磁吸力有最大值3071N。     

Predictive fault-tolerant control of an all-thruster satellite in 6-DOF motion via neural network model updating

The problem of controlling an all-thruster spacecraft in the coupled translational-rotational motion in presence of actuators fault and/or failure is investigated in this paper. The nonlinear model predictive control approach is used because of its ability to predict the future behavior of the system. The fault/failure of the thrusters changes the mapping between the commanded forces to the thrusters and actual force/torque generated by the thruster system. Thus, the basic six degree-of-freedom kinetic equations are separated from this mapping and a set of neural networks are trained off-line to learn the kinetic equations. Then, two neural networks are attached to these trained networks in order to learn the thruster commands to force/torque mappings on-line. Different off-nominal conditions are modeled so that neural networks can detect any failure and fault, including scale factor and misalignment of thrusters. A simple model of the spacecraft relative motion is used in MPC to decrease the computational burden. However, a precise model by the means of orbit propagation including different types of perturbation is utilized to evaluate the usefulness of the proposed approach in actual conditions. The numerical simulation shows that this method can successfully control the all-thruster spacecraft with ON-OFF thrusters in different combinations of thruster fault and/or failure.     

类IXV飞行器初期再入制导与姿态控制方法研究

摘要： 针对类IXV飞行器无翼式升力体构型及采用RCS/尾襟翼组合控制特点，研究其初期再入段的高精度制导与姿态控制方法.设计带过程约束的数值预测 校正制导律以提高制导系统的鲁棒性及精确性；根据其执行机构配置特点，设计基于RCS的航向控制律及基于RCS/气动舵的纵、横向复合控制律，并采用鲁棒伺服LQR技术进行控制参数快速设计.通过蒙特卡洛打靶仿真来验证算法的精度及鲁棒性.     

热防护系统损伤容限分析

建立了含初始矩形损伤的热防护系统(Thermal protection system,TPS)气动热分析的CFD数值模型,分析结果表明损伤区域侧壁出现了很高的热流密度峰值,并且迎风面侧壁峰值高于背风面,而损伤区域底部热流密度却很低。利用分析获得的热流密度建立了含损伤和无损伤TPS的有限元传热分析模型。分析结果表明:损伤的存在导致防热瓦最高温度急剧上升,超过其材料能承受的极限温度(1 500℃),防热瓦首先失效,而损伤对机体最高温度影响较小。最后进行了TPS损伤容限分析,在防热瓦极限温度约束下,外部热流密度最大值从100kW/m2增加到140kW/m2,矩形损伤宽度最大容许值从22.7mm减小到12.6mm,而弧形损伤宽度最大容许值从34.6mm减小到25.1mm,即随着外部热流密度最大值增加,损伤宽度的最大容许值降低,并且相同外部热流密度水平下弧形损伤宽度的最大容许值大于矩形损伤。